Image
image
image
image


PocketPORT 2 Firmware Release Notes

Version 2.2.123
  • Added support for AT&T / Inseego USB800 modem. See this modem setup guide.
  • Improved support for MVNO network connections
Version 2.2.109
  • Improved detection of CDC_Ethernet style modems
  • Fixed issue with corrupted diagnostic export filename
Version 2.2.108 Version 2.2.104
  • Added optional TTLCLOAK directive to prevent the PocketPORT from decrementing the Time-to-Live counter on packets passed to the WAN interface
Version 2.2.100
  • Added auto-configuration support for the Verizon (Novatel) USB730L USB modem
  • Improved resistance to port-scan attacks by silently discarding requests for inactive services
  • Improved DHCP Server performance
Version 2.2.90
  • Added auto-configuration support for AT&T Velocity USB Stick (ZTE MF861 - requires USB adapter ACC-USB-003)
  • Added ability to disable DHCP server in NAT mode
  • Added Diagnostic File Export feature
  • Automatically adjust DHCP pool subnet when PocketPORT's LAN IP is changed
  • Fixed issue with Signal Strength Graph
Version 2.2.76
  • Allow static IP to be assigned to StarTech USB2106S adapter
Version 2.2.70
  • Fixed Signal Strength display issue on Pantech UML295 modem
  • Forcibly enable port forwarding on the Pantech UML295 modem
  • Fixed issue with null parameter overrrides
Version 2.2.69
  • Added feature to restrict WAN connections to specific IP addresses
  • Disable AutoPing by default on 340U modems - not required for this modem
  • Added support for the Huawei E3372 modem
  • Added support for the Huawei E3372h-153 modem
  • Added support for the ZTE MF823 (requires USB adapter ACC-USB-003)
Version 2.2.65
  • Added support for Verizon / Novatel MiFi USB620L modem
  • Fixed DNS issue affecting some RNDIS/CDC_Ethernet modems
Version 2.2.42
  • Fixed issue affecting automatic reconnection of serial modems under certain rare conditions
Version 2.2.41
  • Added support for Sierra Branded 313U modems
  • Added support for the Sierra MC7550 modem
  • Added support for the BandRich C501 modem
  • Added support for the ZTE MF730M and K4201 modems
Version 2.2.38
  • Fixed a potential security issue affecting Virtual Cable Mode operation.
    All PocketPORT's using Virtual Cable Mode must be at firmware release 2.2.38 or later. Firmware version 2.2.38 is no longer inter-operable with previous firmware versions.
Version 2.2.34
  • Reduced size of AutoPing data packets (8 bytes vs. 64 bytes)
Version 2.2.33
  • Fixed MTU issue affecting Virtual Cable Mode
Version 2.2.27
  • Fixed issue affecting the UML290 modem in Virtual Cable Mode
  • Fixed issue affecting remote firmware updates (WAN) when using certain modems
Version 2.2.26
  • Added support for the Alcaltel X080S modem
  • Added support for the ZTE MF637
  • Added support for the prepaid variant of the Novatel USB760 modem (Verizon)
  • Fixed issue with syslog data
Version 2.2.23
  • Added support for the Huawei E353s-2 modem
  • Added support for the ZTE 668 modem
  • Added support for the Netgear (Sprint) 341U modem with firmware: NTG9X15C_45.04.10.00 r18196 uscbd-fwbuild1 2013/11/19.
    341U's with earlier firmware should use PocketPORT firmware 2.2.13
  • Added SCP (Sierra Control Port) command
  • Fixed issue affecting Reboot on Disconnect in Virtual Cable Mode
  • Fixed issue with Virtual Cable Server DNS lookup
  • Updated Auto-Config settings for several modems
Version 2.2.13
  • Added support for the Huawei E3131 HiLink modem
  • Added support for the Huawei E3251 modem
  • Added support for the Huawei E392u modem
  • Added NOREMOTEMGMT command to disable WAN access to the PocketPORT
  • Updated Auto-Config settings for several modems
Version 2.2.9
  • Added support for the Netgear AirCard 340U (AT&T Beam) modem
Version 2.2.0
  • Initial Release
  Printer Friendly Version
image
image
image
image