Model | E3131s-65 |
|
Manufacturer | Huawei |
Other Names | E 3131, E3131, HiLink |
Antenna Jack | CRC9 |
Pigtail Part # | NA |
Auto Configured by PocketPORT 2? |
No. See Manual Settings below.
|
Comments | There are several variants of this modem for different cellular operators. If Auto Configuration does not work for your modem, contact Proxicast Support for assistance.
Please refer to this knowledgebase article regarding the limitations of using HiLink Mode. |
Manual Configuration Settings |
USB Modem Type | GSM / HSPA / LTE |
USB Modem Port | ttyUSB0 |
Required Additional Configuration Parameters | DefaultVendor=0x12d1 DefaultProduct=0x1f01 TargetVendor=0x12d1 TargetProduct=0x1001 InquireDevice=0 MessageContent=55534243123456780000000000000011060000000000000000000000000000 If not 'NONE', paste the text in red above into the Additional Configuration Settings field and then Write the full configuration to persistent memory. |
Configuration Comments | For HiLink Mode (not recommended), set the Modem Type to CDC_Ethernet, change the PocketPORT's LAN subnet to something other than 192.168.1.1/24 and use these configration settings:
DefaultVendor=0x12d1 DefaultProduct=0x1f01 TargetVendor=0x12d1 TargetProduct=0x14db InquireDevice=0 MessageContent=55534243123456780000000000000a11062000000000000100000000000000 |