| Model | MF831 |
|
| Manufacturer | ZTE |
| Other Names | 831 |
| Antenna Jack | TS9 (x2) |
| Pigtail Part # | ANT-104-TS9 |
| Auto Configured by PocketPORT 2? |
No. See Manual Settings below.
|
| Comments | Note: There are multiple variants of the MF831 available from different cellular operators. If the settings above do not work for your MF831, contact Proxicast Technical Support for additional information.
Configure the PocketPORT before inserting the USB modem. After writing the configuration parameters to persistent memory, power off the PocketPORT, insert the USB modem and power the PocketPORT back on. |
| Manual Configuration Settings |
| USB Modem Type | RNDIS_Ethernet |
| USB Modem Port | NA |
| Required Additional Configuration Parameters | NONE If not 'NONE', paste the text in red above into the Additional Configuration Settings field and then Write the full configuration to persistent memory. |
| Configuration Comments | Set Attempt AutoConfig to "No" on the PocketPORT. Enable "Auto Connect" on the modem. |
