| *** Support for this modem requires PocketPORT firmware
version 2.2.123 or later. Configure the USB8L to Auto Connect and enter the correct APN for your Verizon account via the USB8L's internal web server (http://192.168.1.1) with the modem plugged into a PC before attempting to use the USB8L with the PocketPORT. The USB8L must be in IPPT & End User Modes - with the modem in a PC. To check, go to http://192.168.1.1/labtestinfo and select IPPT & End User Modes if the PocketPORT does not go online. When operating in NAT Mode, PocketPORT LAN IP subnet must be changed from 192.168.1.x / 255.255.255.0 to avoid IP conflicts with this modem. This modem takes longer than most others to connect to Verizon. Allow up to 2 minutes for the connection to complete. We recommend disabling AutoPing when using this modem by clearing the AutoPing Target IP address in the PocketPORT. The USB8L uses a nano sized (4FF) SIM card.
| 
